Start by drawing out one shape and a half circle. The oblong bar like shape is for the body of the bike and the half circle is for the top part of the bike.

STEP 2.

Here you begin drawing out the windscreens and the front part of the bikes aerodynamics.

STEP 3.

Here you will begin drawing out the side mirrors like so, and then draw in the detailing lines that add definition to the plastic or fiberglass of the bikes shell.

STEP 4.

Here is where you will take your time as you sketch out the bikes levers which is also the handles that controls the bikes gears. Take your time and be sure to draw out the mechanics of the motorbike design.

STEP 5.

Okay, now you will draw out the hump that is usually home to the gas tank, and all the units that displays the speed, gas levels, and rpm meter. Once that is done, you can draw out the back part of the bike which is for the seat, and hover cover for the muffler pipes. Be sure to draw it the way you see it here.

STEP 6.

Now you will sketch in the detailing lines that will be for the padding of the seat, and the back storage door. Draw in the rest of the bikes fiberglass hub and then move to the next step.

STEP 7.

Okay now we can get into the mechanics of drawing out the back end of the bike which is the blinker lights, and some of the metal framing that holds the license plate, and tailpipe.

STEP 8.

These are parts to the motorbike that you will drawing out. Unfortunately I'm not too sure what these parts are called but I'm going to try my best. To start, draw out the body work or fairing, and then draw in the rest of the mechanics of the bike which is also some of the functional parts.

STEP 9.

Here is where you will draw out the spoiler which is located on the bottom of the bike. When that is done you can move to the front of the bike and begin drawing out the front fork, and the front fender. Draw in the detailing to the bike, and then move to step ten.

STEP 10.

The back of the bike is home to things like the footrest, gear shift lever, exhaust pipe, main stand, kick stand, and even some of the bearings. Draw out all of these components like you see here, and move top step eleven which will bring you that much closer to getting the motorbike drawn out.

STEP 11.

Okay now draw out the back wheel or tire, and then draw in the chain which is connected to the gear shaft. When this is done you have to also draw out the lining for the rim.

STEP 12.

Add all the detailing to the rim, and then sketch in the tire threads which is a few short dash lines. Draw in the bolt that holds the tire in place, and then move to step thirteen.

STEP 13.

You are almost done with this tutorial on how to draw a motorbike and I know that it seems to be very long. But all you have to do here is draw out the front tire and then draw in the rim line.

STEP 14.

Draw in the rim and front gear and braking system like so, and then draw the detailing for some of the rim. when you are done here just move to the next step which also happens to be your last.

STEP 15.

Well guys you finally reached the last drawing step. As you can see all you need to do is first start erasing all the lines and shapes that you drew in step one, and then draw in the front tire threads and more of the rim detailing. When you are sure that your motorbike looks good, you can move to the last drawing step to see how your drawing should look.

STEP 16.

This is what your motorcycle looks like when you are finally finished with drawing this motorbike. I know the lesson was long, but for all you bike nuts out there, I'm sure it was worth the wait and effort. Thanks for joining me for this lesson on how to draw a motorbike.